Installation Process is not to different from my previous mods.

REMEMBER TO COPY TO MODS FOLDER BEFORE YOU FIDDLE!!



CHEF
Using OpenIV, open x64e, levels, models, cdimages, compenentpeds_ig and componentpeds_csb.
Add the modded files from this mod's chef file to these two directories respectively (csb_chef stuff goes to csb, ig to ig)



DAVENORTON
Using Open IV, open x64e, levels, models, cdimages, streampeds_ig. 
Replace ig_davenorton.yft with the mod's igdavenorton yft file.
Delete everything within ig_davenorton, and add all the ydd and ytd files.

Now, go to x64g, levels, gta5, generic, cutspeds.
Replace cs_davenorton.yft with the mod's csdavenorton.
Open cs_davenorton, delete everything and add all the yft and ydd files.

Now, go to update, x64, dlcpacks, patchday7ng, dlc, x64, models, cdimages, patchday7ng.
Open ig_davenorton and delete everything in the file.


HC_DRIVER
Using Open IV, open x64e, levels, models, cdimages, streampeds_hc.rpf
Replace hc_driver.yft
Open hc_driver, delete everything, add mod files.

Go to update, x64, dlcpacks, patchday4ng, dlc, x64, models, cdimages, patchday4ng, hc_driver.
Delete everything.
Go back to dlcpacks, then to patchday3ng, dlc, x64, models, cdimages, patchday3ng, hc_driver.
Delete everything, and add the ytd and ydd files. Replace the yft file.

Go to x64v, models, cdimages, streamedpedprops, hc_driver_p
Add the files from the mod.



HC_GUNMAN 
Generally same as HC_DRIVER, go to streamedpeds_hc
Replace hc_gunman.yft
Open hc_gunman, delete everything, add from mod.
Go to x64v to streamedpedprops, then hc_gunman_p, add files.
Go to patchday4, replace hc_gunman.yft 
Open hc_gunman, delete and add.
Go to patchday3, replace the yft file, delete everything in hc_gunman and add mod files.


LAMARDAVIS
Go to x64e to ig_streamedpeds, replace yft file with the ig_lamardavis yft file from the mod. 
Delete everything in ig_lamardavis folder, add modded files in respective folder.
Go to x64g, levels, gta5, generic, cutspeds.
Replace the cs yft file with the one in the mod.
Delete everything in cs_lamardavis and replace with mod files.


LESTERCREST
Same method as lamar, only cs and ig ydd and yft files are interchangable.
Afterwards, go to pedprops and add the lestercrest_p file to the ig_lestercrest and cs_lestercrest.
Go to dlcpacks, mppatchesng, dlc rpf, x64, models, cdimages, mppatchescutspeds.
Replace the yft file. Open cs_lestercrest, replace the files with their respectively named files in the mod.
(hand_000_r.ydd, uppr_000_u.ydd, uppr_003_u.ydd)


NERVOUSRON
Same deal with Lester and Lamar, you've got a few peds done already, you can handle this one on your own!
cs, ig, yft files, ped props, etc etc.
Next, go back to mppatches as previously with Lester. 
Replace the yft file there, and then replace the stuff in the cs_nervousron file with the mod stuff.
Next, go back to dlcpacks, patchday16ng, dlc, x64, models, cdimages, patchday16ng.rpf.
Replace the single ydd file in there, lowr_000_r.ydd
Finally, go to patchday3ng, then the cutspeds directory.
Replace cs_nervousron.yft
Go to cs_nervousron and replace the files.


STEVEHAINS
Like the previous 3.
x64e ig, x64g cs, no pedprops to replace.


WADE
Exactly like Steve Haines. ig, cs, no pedprops.

 




