Welcome to Flight Assistant! This script aims to make flights more immersive.
Inside the uploaded file there’s a Flight Assistant User Guide pdf file (25 pages) giving details about the script.
Features:
-Controlable reverse / reverse effect.
-ECAM
-Alert box
-System information
-Weather report
-Applied Power display
-Reverse visually deploying retracting on models with functioning reverse.
-Openning reverse in air and thrusting while on manual or semi mode makes you kiss the ground.
-Fuel consumption based on throttle and engines, Refuel, Fuel Dump.
-Rain/Snow ground effect.
-Rain/Snow can make aircraft take longer to land (feature depends on parameters, check User Guide for further information)
-Adjustable engine idle rotation and increment values.
-No engine off when reducing speed while airborne.
–Alarms: adjustable according to manufacturer and/or model (can create A319 warning sounds pack, another for A380 and so on).
-PA announcements according to company (default “NoCompany” and easyJet sample included). Check User Guide to see how it is possible.
-Envelope protection on auto mode (corrects stall, sink rate, collision, excess roll).
-Auto take off and landing helper.
-Rejected take off manoeuvre.
-Go-Around manoeuvre.
-Auto retract/deploy gear.
-Engine umbalance effect.
-Instrument Landing System => PAPI Lights & Glide Slope & runway’s start/end highlight.
-Low hotkeys usage.
-Flight Management System => Takes input from user, check User Guide for a list of commands.
-Memories and Event Action => Dynamic and automated use of commands.
-Light / headlight auto control.
-Boarding gates.
-Runway specification: for landing / for take off / for both.
And many other tiny funny things.
Changelog:
Beta 1.5 08/apr/2021:
New Feature:
Created Maintenance spot with respective reached/left event.
New command “Repair”.
Improvement:
Refined Yaw control during auto landing
Refined Yaw control during auto takeoff
Refined Yaw control during auto takeoff rejection brake
Modified Files:
ini file discontinued, FlightAssistant.xml works as ini file and should be placed same folder as dll file.
aiports.xml: new field to store flare’s descent ratio “flareRate”.
aiports.xml: new field to store maintenance location.
aiports.xml: new field to set specific airport to load or not.
Fixes:
Fixed an issue that caused the center align to be always positive when reference line was off before runway being selected.
Fixed an issue that reset Landing state when climbing 100 metres above Landing Request height instead of transitioning to Flying state.
Fixed an issue that prevented landing approach to automatically abort when runway was occupied.
Fixed an issue that triggered “Left Gate” event when moving through selected gate without stopping.
Fixed an issue that made nested elements be saved outside model’s node in models.xml.
Fixed an issue of powerbackCoef being applied on brakeCoef if model didn’t have it set in models.xml.
Beta 1.4 15/mar/2021:
New Feature:
Added climb/descent rate function (“Hold” command). Suggested by n8v.
Added function keys which triggers commands or memories when pressed.
Beta 1.3 02/mar/2021:
Fixes:
Fixed a glitch where it would accuse damaged landing gear even when working properly.
Changed the way rotation increases when taking off, now if you throttle up while rotation is below idleTakeoff it will aplly incrementGeneral.
Beta 1.2 28/feb/2021:
Fixes:
Fixed a glitch where aircraft was not properly updated when switching between same models.
Fixed a crash that occurs when runway’s width was set to 0.
Removed odd notification when engine was damaged.
Beta 1.1 26/feb/2021:
Fixes:
Removed odd notification on specific situation regarding rejected take off.
Corrected stallCoef formula described on Table 10 on User Guide.
Annoying script start up notification removed.
Added:
User defined refresh rate.
Definition of engine homing below Table 8 on User Guide.
User Guide in spanish (using google translator)
Modified Files:
config.xml => new fields were created to store refresh rate values. Those fields can be found at refreshRate node.
User Guide => updated.
Credits:
Degas
Download mod
| File | File size |
|---|---|
Flight Assistant Beta v1.5 | 5 MB |
