2013 Chevrolet Caprice PPV – Slicktop and Unmarked – Blaine County Sheriff’s Office (BCSO) [Add-On | DLS / non-ELS] 1.2S

2013 Chevrolet Caprice PPV - Slicktop and Unmarked - Blaine County Sheriff's Office (BCSO) [Add-On | DLS / non-ELS] 1.2S

A fictional, California-inspired BCSO Chevrolet Caprice with Code 3 interior lights, with slicktop and unmarked configurations. A non-ELS vehicle featuring optional DLS support for light stages and traffic advisor patterns.

Vehicle Slot: bcso2slick and bcso2unm (Add-On)
Lighting Equipment: Code 3 Supervisor and Wingman
DLS Support: DLS 1.4 (optional)
Multiple Liveries: Supported

Notes
This mod supports DLS (Dynamic Lighting System) for realistic light stages, siren controls and more. DLS is optional, this car functions as a non-ELS car without DLS.

Extra components:

extra 5: Pushbar (Slicktop: always on by default; Unmarked: always off by default)
extra 6: Trunk Chevrolet badge (Slicktop: always off by default; Unmarked: always on by default)
extra 7: Driver side mirror light (always on by default)
extra 8: Passenger side mirror light (always on by default)
extra 9: Partition and spotlights (Slicktop: always on by default; Unmarked: always off by default)

Recommended Mods:
Better License Plates
Code 3 Z3 Siren
SirenSetting Limit Adjuster (minimizes the risk of sirensetting ID conflicts with other mods)

Installation
Recommended: Automatic installation with LML (Lenny’s Mod Loader)
Copy the Add-On folder with its contents into your GTAV\lml folder. Open the Mod Manager, select the modification and click the “Copy files to game” button to install the DLS Vehicle Config File and the custom DLS UI.

Optionally, if you do not use any mod that enhances the light brightness, open the Mod Manager, double click on the modification’s name and enable the “Visual Settings (Brighter Lights)” group.

Manual Installation
Open the Add-On folder and copy the contents of the Files\GTAV folder to your GTA V folder.

Export GTAV\update\update.rpf\common\data\dlclist.xml using OpenIV, open it with any text editor, and add the following line between and at the bottom of the file:
dlcpacks:/acbcso2slick/
Replace the original dlclist.xml with the edited one.

To install the DLS Vehicle Config File, copy the contents of the Data Files\DLS\GTAV folder to your GTA V folder.

Optionally, if you do not use any mod that enhances the light brightness, replace GTAV\update\update.rpf\common\data\visualsettings.dat with Data Files\visualsettings.dat.

Credits:

Original vehicle model is Pontiac G8 from Forza, edited into the 2013 Chevrolet Caprice PPV by Kane104. Model assembled with contributions from EVI in the form of a scratch modeled front bumper and bonnet, whilst all other model edits such as the rear end and interior were performed by Kane104.
Dirtmap and minor edits made by Cj24.
Rims made by Kane104, Tire textures by EVI.
Code 3 Supervisor and Wingman interior lights and MR6 grill and mirror lights modeled and textured by Cj24.
Setina PB400 pushbar modeled by Ridgerunner, modified and textured by Cj24.
Motorola radio, M4 rifle and Stalker radar modeled and textured by Kane104.
Setina partition made by EVI, textured by Kane104.
Console, Code 3 Z3 siren controller, C3100 siren speaker, weapon mount, Panasonic Arbitrator dashcam, Panasonic Toughbook, SoundOff Signal dome light, Unity spotlights, and antennas modeled and textured by Cj24.
Liveries, Lighting and DLS setup, and configuration files by Cj24.

Download mod

FileFile size
zip 2013 Caprice - BCSO Slicktop 1.2S24 MB

Leave a Reply

Your email address will not be published. Required fields are marked *